MDD115C-N-015-N2L-130GB2

Product Description

Bosch Rexroth's mission is to provide high-quality products to its clients, and its AC servo motors, frequency converters, inverter modules, brake choppers, control sections, and controllers all contribute to this mission. These components are often used in automated systems in a variety of sectors.

The MDD115C-N-015-N2L-130GB2 model has a plain output shaft and a sealing ring, and it should only be used according to the manual's instructions. The model generates a maximum torque of 146.1 Nm at a maximum speed of 1500 revolutions per minute while drawing a maximum current of 180.7 A. The MDD115C AC servo motor's centered diameter is 130 millimeters and its black finish is 40 microns thick. The windings of this motor have been equipped with a temperature sensor to avoid overheating and overloading. For optimal performance, the gadget must be set up and handled by a trained expert. The insulation class of the servomotor is F, and its torque constant is 1.17 Nm/A. A wire with a minimum diameter of 0.75 mm² is connected to the power connection on the B side of the housing to provide power to the motor. The MDD115C AC servo motor has a 3.5-kilogram holding brake and fulfills IP 65 dust and water resistance requirements.

The model MDD115C-N-015-N2L-130GB2 weighs 52 kilograms and generates 47 Nm of constant torque while using 40.2 A of constant current. The AC servo motor features a winding inductance of 3.5 mH, class N balancing, and a housing suitable for natural and surface cooling. The model's unique appearance makes it suitable for usage in a variety of different settings for the operation of machines. The model (MDD115C-N-015-N2L-130GB2) has digital servo feedback for monitoring the rotor's activity.