Product Description
Bosch Rexroth is a manufacturer of products that improve the performance of systems. Due to its vast product line, Bosch is a one-stop shop for all industrial automation requirements.
The MDD115C-F-030-N2L-180PA2 model is equipped with a holding brake that has a holding torque of 60 Nm and a nominal current of 1 A. With an IP65 certification, the motor is resistant to dust and moisture. The first number represents dust protection, while the second number represents liquid protection. The MDD115C AC servo motor has an A-side power connection as well as a quick thermal time constant thanks to liquid cooling. The motor is only permitted to be transported or stored between -20 and +80 degrees Celsius. The model is created using both electrical commutation and permanent magnets. The maximum output torque of the motor is 146.2 Newton meters, and the maximum speed is 3,000 revolutions per minute. To reach the needed levels of power, the model must be operated between 0 and 45 degrees Celsius and between 0 and 1000 meters above sea level. Using a low continuous current, the 52-kilogram servo motor can provide a constant 47 Newton-meters of torque. The insulation rating of the MDD115C AC servo motor is F, and its output shaft with keyways incorporates a sealing ring.
The model MDD115C-F-030-N2L-180PA2 has digital servo feedback and must be used with the manufacturer-recommended drive controller and accessories. The conduit threaded connection of the motor's power connection must be equipped with strain reliefs to guarantee interference-free operation. The model is supposed to have a long lifetime due to its brushless construction and smooth bearings. This servo motor (MDD115C-F-030-N2L-180PA2) is offered for sale by Wake Industrial with a simple replacement warranty.
Wake Industrial Warranty
