Product Description
The MDD115C-F-020-R2L-130GA2 is a servo motor. It is part of the MDD product line from Bosch Rexroth. It is meant to be used in combination with a Bosch drive controller. The function of the drive controller is two-fold: provide motor power and control motor parameters. Typical applications of MDD motors are robotics, handling equipment and transfer facilities. MDD115 motors are particularly well suited to highly dynamic applications such as roller feeds for punching, pressing and nibbling machines and tool changing devices. MDD motors are AC motors that are based on permanent magnets. The brushless design and use of life-time lubricated bearings make MDD motors maintenance free. As the motor housing is completely sealed, MDD motors can be used directly within the working area of the machines even under poor environmental conditions.
MDD motors support temperature monitoring by means of a temperature sensor that is built into the motor windings. This protects motor windings from damage in the event of overload. Pinions and belt pulleys can be directly attached to the shafts of MDD motors. The MDD115C-F-020- R2L-130GA2 has a centering diameter of 130 millimeters. The motor supports digital servo feedback. This enables the motor to send information about parameters such as speed and torque to the connected drive controller. Rated speed of the MDD115C-F-020-R2L-130GA2 is 2000 RPM. The main shaft on the motor is plain. The power connection is situated on side A of the housing. The MDD115C-F-020-R2L-130GA2 includes a 60 NM rated blocking brake. The continuous torque and current at standstill are 47 Nm and 51.5 Amps. Approximate shipping weight of the MDD115C-F-020-R2L-130GA2 is 52 kilograms. The weight of the motor blocking brake is approximately 3.5 kilograms.
Wake Industrial Warranty
