Product Description
Bosch Rexroth is specialized in the manufacturing of products like servo motors, operator terminals, and inverter modules.
The MDD115B-N-030-N2L-130PA0 model provides high dynamics and high overload capabilities when used together with the drive controller specified by the Bosch Rexroth. For higher efficiency, only company-recommended products are allowed to be operated with this motor. The MDD115 AC servo motor is designed to operate at the continuous speed of 3000 rpm and the phenomena of natural convection are used to overcome the heat effect generated during continuous operations. The MDD motor housing is equipped with permanent magnets that generate the continuous torque of 30 Nm while consuming the constant current of 81.9 A. The model comes under balance class-N as per DIN VDE 0530 and it comes without a side-B shaft end. The MDD115 AC servo motor has a centering diameter of 130 mm. The model is equipped with digital servo feedback (DSF) for relative direct position detection. A rotor balanced with an entire key is installed in this unit to execute a form-fitting transmission of torque. To accommodate extreme loads, a surface cooling mode is provided in this model.
The model MDD115B-N-030-N2L-130PA0 should be handled according to the instructions mentioned in the MDD user manual. As per the MDD user manual, the permissible installation altitude for this motor is 1000 m/sea level and the allowable surrounding temperature range for this model is 0 to +45 degree Celsius. The motor efficiency will decrease with the further increase in altitude or ambient temperature. The torque constant for this model at 20 degree Celsius is 0.46 Nm/A. This model weighs around 41 kg. Order this servo motor now from Wake Industrial and get it at your provided address with a one year warranty period.
Wake Industrial Warranty
