Product Description
The MDD115B-N-020-N2L-130PA2 digital AC servomotor transportation must be undertaken by using appropriate lifting equipment. The Bosch Rexroth servomotor is picked up and transported using a chain tackle. This product with the drive controller generates a rapid-response automatization system. The device is utilized for roller feeds for pressing machines. This unit comes with a compact construction. Its housing design and construction adhere to DIN 40 050 specifications. The motor installation vertically with its shaft on the top must have no liquid surrounding the shaft. This product utilizes a 60Nm blocking brake. The device might get fractured due to increasing deformations of the shaft.
The motor depicts thermal stress with bevel gear pinions leading to damage to its fixed bearing. This unit depicts a very hot surface soon after as well as during operation. Its shaft sealing does not offer absolute penetration of liquids into its housing. The product comprises an optical system encoder with digital servo feedback featuring relative position detection. This device features a duty cycle time of up to 15 minutes. The unit uses circular connectors for its power and feedback connections. Its blocking brake wears down after nearly 20,000 revolutions in the closed state. This servomotor has a warranty for a year.
The motor comprises a 10 x 8 x 45 matching key in compliance with DIN 6885-A specifications for the output shaft. This product has a B length code. The device weighs 41kg without its supported blocking brake. This unit uses either an INS 172/06 crimping-type power connector or an INS 172/25 soldering-type power connector. It uses a silicone-free and halogen-free feedback cable. The motor type-plate helps in the procurement of spare parts when there is a failure. This product is protected against damage and moisture through its plastic protective covers placed over the shaft as well as connectors. This servomotor is transported in custom military-grade packaging.
Wake Industrial Warranty
