Product Description
Bosch Rexroth's top-notch AC servo motors, frequency converters, inverter modules, brake choppers, control sections, and controllers all contribute to the company's mission to provide excellent quality to its clientele. These components are often used in automated systems in a variety of sectors.
The MDD115A-N-030-N2L-130GA1 model has 1.9 kilograms holding brake and fulfills IP 65 criteria for dust and water resistance. The model has a plain output shaft with a sealing ring, and it should only be used in accordance with the manual's instructions. A wire with a minimum diameter of 0.75 mm2 is attached to the power connection on the A side of the housing to provide power to the MDD115A AC servo motor. The 33-kilogram AC servo motor features a 2 mH winding inductance, class N balancing, and suitable housing for both natural and surface cooling. The model's unique design makes it applicable for effective machine operation in a wide variety of situations. The motor has a centered diameter of 130 millimeters and a 40-micron-thick black finish. For optimal performance and the lowest damage, the device must be installed and operated by a trained specialist. At standstill operation, this MDD115A AC servo motor generates 28 Nm of constant torque while using 42.4 A of constant current.
The model MDD115A-N-030-N2L-130GA1 includes digital servo feedback, 0.13 ohms of winding resistance, and a 90-minute thermal time constant. The windings of this motor have been equipped with a temperature sensor to avoid overheating and overloading. The model generates 87.1 Nm of theoretical torque at a maximum nominal speed of 3000 revolutions per minute while using a maximum current of 190.9 A. The model (MDD115A-N-030-N2L-130GA1) features an F insulation class and 0.66 Nm/A torque constant.
Wake Industrial Warranty
