Product Description
The MDD112D-N-030-N2M-130GA2 digital AC servomotor produced by Bosch Rexroth comprises the connecting cables for its blocking brake and temperature sensor as well as the power cable in its power connection. This servomotor features a 40Nm blocking brake as well as a plain output shaft. The product uses either crimped or soldered power connectors. This device has standard electrical connections for connecting to the drive controller. The unit has a balance class of N as per DIN VDE 0530 specifications. It is recommended for applications where high precision is of prime concern. This motor comes with a completely sealed housing. The product has efficient heat conduction from the windings of the stator to the exterior wall of the housing.
This device installation must never exceed 5000m above sea level. The unit features complete safety against the penetration of dust as well as foreign objects. Its blocking brake works on the closed-circuit principle. The motor features a maximum 7mm excursion amplitude for the lateral axis with sinusoidal oscillations. This product supports the Design B14 type mounting style. This device has a length code of D. The unit supports the fitting of belt pulleys over the output shaft. Its housing can be coated with an additional paint layer of more than 40µm. This servomotor depicts one-year backup support.
The product features bearings with a 30,000 operating hours lifespan as per ISO 281 specifications. This device allows only soldering of its power cable if it has an inch diameter. The unit features feedback with data storage capacities in which its parameters are stored. Its axial shaft load is calculated using a formula. This motor has a maximum torque that is dependent on the drive used. The device weighs 59kg without taking the blower and blocking-brake into consideration. This unit has 15 minutes maximum duty cycle time. Its blocking brake has 144,060Nm holding torque. This MDD112D-N-030-N2M-130GA2 servomotor transportation takes place through reputed freight carriers.