Product Description
Bosch Rexroth is dedicated to manufacturing a broad range of industrial automation products like AC servo motors, drive controllers, frequency converters, and brake resistors.
The MDD112D-N-015-N2L-180PL0 model comes in a standard design and a standard bearing is placed in this model to overcome high radial loads. The model takes electrical power through a left-side power connector and a shaft with keyways is installed in this model. The MDD112 AC servo motor is designed to deliver the continuous torque of 38/44 Nm at the constant current of 29.7/34.3 A, while operating at natural/surface cooling mode. A shaft without a side-B shaft end is installed in this AC servo motor. The centering diameter of the motor is 180 mm and it has a thermal time constant of 90 – 120 min. The motor winding generates the winding inductance of 5.9 mH and at 20 degree Celsius, the motor winding generates the resistance of 0.39 Ohms. Digital servo feedback (DSF) is used in this model for relative indirect position detection. The ideal operating speed of the motor is 1500 rpm and it uses natural or forced cooling options to maintain its ambient temperature during continuous operations. The model offers high dynamics and high load capabilities.
The model MDD112D-N-015-N2L-180PL0 can be used under extreme environmental conditions due to its class-F insulation and IP65 protection category. The motor is completely secured against the ingress of dust and liquids. The digital AC servo motor has a net weight of 59 kg and can be installed in any permissible mounting position. No holding brake is attached to this motor and the torque constant of the motor at 20 degree Celsius is 1.28 Nm/A. Wake Industrial deals in the world-leading automation technology and this product can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
