MDD112C-N-030-N2M-180GA2

Product Description

The Bosch Rexroth MDD112C-N-030-N2M-180GA2 is a digital servo motor. As per the motor type code, the code for the motor frame size is 112 and the code for the motor frame length is C. It supports digital servo feedback via an integrated multiturn absolute encoder. The encoder is a sensor that measures motor speed and position and sends this information to the drive controller. The feedback is transmitted through a feedback cable that connects to the feedback connector on the motor. The power from the drive controller is carried through a power cable that connects to the power connector on side A of the motor housing. Both connectors are sealed. The housing of the MDD112C-N-030-N2M-180GA2 is also sealed and is IP65 rated. This signifies that the motor is completely dustproof. The MDD112C-N-030-N2M-180GA2 has a nominal speed of 3000 RPM.

The MDD motors are protected by their housing and covers which in construction and design adhere to the guidelines found in DIN 40050 and protect against contact with high-voltage parts and moving motor parts. The housing of the MDD112C-N-030-N2M-180GA2 is suited to natural convection and surface cooling. The operating parameters vary with the cooling method that is used. Natural convection is suitable for low motor loads. Surface cooling is suitable for high motor loads. The recommended ambient temperature range is 0 to 40 degrees Celsius. The motor should not be used if the ambient temperature is more than 55 degrees Celsius. The recommended altitude for motor installation ranges from 0 to 1000 meters. The motor should not be used if the altitude is more than 5000 meters. The main shaft on the MDD112C-N-030-N2M-180GA2 motor is plain. An integrated blocking brake on the MDD112C-N-030-N2M-180GA2 is rated for 40 Nm holding torque.