MDD112C-N-030-N2M-130GL1

Product Description

Bosch Rexroth is a leading manufactures of AC servo motors, spindle motors, drive controllers, control sections, brake choppers, and other equipment across the world.

The MDD112C-N-030-N2M-130GL1 model has both electronic commutation and permanent magnetic qualities, and it spins at 3000 RPM while delivering 28 Nm of continuous torque and 43.4 A of continuous current at a standstill position. Because of its brushless construction and greased bearings, the MDD112C AC servo motor is expected to last a long time. It has an IP65 protection grade, and insulation class of F, and a balancing class of N. The model has a centering diameter of 130 mm and should be used in temperatures ranging from 0 to +45 degrees Celsius. To ensure intrusion-free functioning, install pressure reliefs in the conduit threaded joint of the motor power connection (left side of the motor housing). The winding resistance of the MDD112C AC servo motor is 0.4 ohms, and the winding inductivity is 2 mH. The placement region must be between 0 and 1000 meters above sea level, or the given power values will not be obtained. The model includes an inbuilt multiturn absolute encoder and a plain output shaft.

The model MDD112C-N-030-N2M-130GL1 with a peak current of 166.4 A and a moment of inertia of 170 x 10^-4 kgm² can generate a maximum theoretical torque of 100.4 Nm. When moving the model from one location to another, temperatures should be kept between -20 and +80 degrees Celsius. The motor includes a 3.5-kilogram holding brake with clamping and release delays of 30 and 70 milliseconds, respectively. The nominal current and voltage of the holding brake are 0.75 A and 24 volts, respectively. The model weighs 48 kilograms and has a torque constant of 0.65 Nm/A at 20 degree centigrade.