Product Description
The MDD112C-N-030-N2L-130GB2 digital AC servomotor offered by Bosch Rexroth features protective covers on its shaft as well as the housing of its connectors. This servomotor must not be subject to load during storage and transportation. The product pickup action must be accomplished with the help of a crane and appropriate lifting belts. This device portrays the C length code. The unit has two M8 tapped holes on its housing. Its housing supports both natural convection and surface cooling mode. This motor must not have any impact or heavy loads on the shaft as this can destroy the bearings. The product encompasses spigot nuts on its feedback and power connectors.
This device’s operation and maintenance must be undertaken only by trained personnel. The unit is to be disconnected from the power supply when any repair work is being done on it. Its power and feedback cables have a length of 75m. The product uses its blocking brake for the backlash-free holding of its servo axes when the machinery in which it has been installed is powered off. This device has a thermal time constant of 75 minutes with surface cooling. The unit uses a smaller power connector for natural convection when compared to surface cooling.
This motor permits both soldering and crimping of its power connector if its power cable features a metric diameter. The product comprises temperature sensor integration in its windings. This device has an N balance class as per DIN VDE 0530 specifications. The unit is highlighted by a completely sealed housing. It can be mounted upright with the shaft facing either upward or downward. This motor has up to 20m/s2 acceleration amplitude for its lateral axis with sinusoidal oscillations. The motor blocking brake encounters a magnetic force on its armature disc at zero current. This servomotor with backup support for one year is shipped in rugged packaging.
Wake Industrial Warranty
