Product Description
The MDD112C-N-030-N2L-130GB0 digital AC servomotor offered by Bosch Rexroth does not support functioning with rated data when the installation elevation is more than 1000m. This motor has a high contouring accuracy at a high-speed rate. The product is characterized by a completely sealed housing. This device is protected against overload damage by the temperature monitoring functionality. The unit has connectors on its flanged sockets. It features protection against water and extrinsic object penetration. The motor has IP 44 protection rating when a blower is fitted onto it. The product portrays a maximum 7mm excursion amplitude for its lateral axis when it encounters sinusoidal oscillations.
This device tends to experience peeling of the coat on its housing when it is cleaned often using a steam cleaner. The unit must have no condensation, ice mist or salt formation on its surface at any point in time. It has separate thermal time constants with natural convection as well as surface cooling. The motor installation in the vertical orientation can be done with the shaft facing either upward or downward. The product allows the fitting of pressure sleeves or clamping sets on its output shaft for coupling belt pulleys or pinions. This motor features backup support for one year.
The product supports turning the feedback connector in increments of 90° until the desired position is achieved. This device’s power connection features a power cable as well as a connecting cable for its temperature sensor. The unit uses a power cable with either an inch diameter or a metric diameter. Its balance class applies to only the motor alone and not the components mounted on the shaft. The motor implements an optical encoder system with a system accuracy of +/-0.5 angular minutes. This product supports S1 and S6 operating modes. This motor transportation is done with the help of reputed freight carriers.
Wake Industrial Warranty
