Product Description
The MDD112C-N-020-N2M-180GA2 Bosch Rexroth digital AC servomotor must be free of liquid accumulation around the shaft with upright installation and the shaft facing upwards. This motor is equipped with a 40Nm blocking brake. The product features two tapped holes on its housing to screw in lifting screws as per DIN 580 specifications. The device transportation and storage should be done only in horizontal orientation. The unit wiring needs to be done in accordance with the terminal diagrams of the machine manufacturer. Its startup, operation and maintenance must be done only by trained personnel. The motor has high contouring accuracy at high feed rates.
The product is used in instances where an extreme degree of synchronism is required. The device has low inertia because of the choice of magnetic materials like iron oxide or rare earth for its permanent magnets. The unit has the ability to render maintenance-free operation. Its shaft is fitted onto the rotor. The motor operation can be done directly within the working area of the machine. This product is noted for its high dynamics. The device requires minimum installation because of the manufacturer’s readymade cables that simplify the installation process. The unit uses its blocking brake to hold or clamp its output shaft at a standstill.
The motor is designed to be put into operation between 0°C and 45°C. The product is protected by its housing against the penetration of extrinsic objects. The device has a 7mm maximum excursion amplitude for the lateral axis with sinusoidal oscillations. The unit incorporates B5 mounting flange with throughholes. Its installation is possible both horizontally and vertically. The product comprises a plain output shaft that renders non-positive and backlash-free torque transmission. This shaft encounters a load as soon as it is affected by axial and radial forces. This MDD112C-N-020-N2M-180GA2 motor is available for global shipping with a year’s Wake Industrial warranty.
Wake Industrial Warranty
