Product Description
The MDD112C-N-020-N2L-180PB0 digital AC servomotor provided by Bosch Rexroth is used in grinding machines and for other applications that demand high precision. This servomotor operation must not take place without the drive controller connection. The product has a 2000min-1 nominal motor speed. This device is not affected by coolants or soluble oil emulsions and can function under poor environmental conditions. The unit has a B length code and a 112 size code. It houses one temperature sensor in its stator windings to monitor its temperature in order to avoid overload damage. This motor portrays compact construction style resulting in a high power-to-weight ratio.
The product connection is supposed to be done with a wide range of readymade cables from the manufacturer to eliminate additional installation work. This device has a mounting flange fitting that has either holes or threads based on the type of mounting deployed. The unit has a 34.3A continuous current at standstill with surface cooling. Its axial forces are absorbed by the floating bearing on the B side. This motor is balanced with a 10 x 8 x 45 matching key as per DIN 6885-1 specifications. The device depicts a multi-axial stress state because of bending or torsion at the shaft-hub connection point. This AC servomotor comes tagged by backup support for one year.
The motor deploys a radial blower for surface cooling when high shock requirements should be met. This product storage is meant to be done in a cool and dry place. The device has a high cyclic load capacity to allow continuous start-stop operations with high repetition rates. This unit mounting and operation are to be done only by fully trained personnel or under the supervision of an electrician. Its blower has an IP 24 protection category and can be mounted only after disconnecting its electrical connections to the motor. This AC servomotor can be sent to any destination in the world.
Wake Industrial Warranty
