Product Description
The Bosch Rexroth MDD112C-N-020-N2L-180GB2 digital AC servomotor is used in instances where extreme synchronization is required. This motor portrays peak torque over a wide speed range. The product has a simplified installation process with the manufacturer’s readymade cables. The device installation is possible in both vertical and horizontal orientations. The unit has a customized pilot diameter of 180mm. Its plain shaft ensures backlash-free torque transmission. The motor supports the attachment of a blower with 1 x 230VAC and 115VAC voltage rating over its housing. The product incorporates a compact and short construction style.
The device portrays a balance class of N in accordance with DIN VDE 0530, Section 14 specifications. The unit utilizes a feedback connector of straight or angle type. Its permissible axial force depends on the permissible radial force of this motor. The motor power cable with an inch diameter supports only a soldering action. The product integrated encoder allows indirect absolute position detection of the motor. This device comprises a breaking point for the maximum torque based on the DC bus voltage supplied to the connected drive controller. This motor comes along with a year’s backup support from Wake Industrial.
The motor has an 11.8A continuous current in standstill mode. The unit features 24VDC +/-10% nominal voltage rating for its holding brake. Its intermittent duty torque and permissible continuous torque are depicted by its operating curves. This product features a thermal time constant of 100 minutes. The device encompasses spigot nuts on its connectors. The unit utilizes a blower to assist in axial surface cooling. It must be lifted by holding on to the lifting screws when a blower is mounted. The motor has two tapped holes in the housing through which the hooks of a chain tackle can be fixed. It is possible to send this motor to your address in any country.
Wake Industrial Warranty
