Product Description
The MDD112C-N-015-N2L-130GA1 digital AC servomotor manufactured by Bosch Rexroth has a high contouring accuracy at high feed rates. This servomotor is a good choice for installing in high-speed ranges. The product has two tapped holes on the housing. This device features a high level of synchronization because of the excitation by permanent magnets. The unit is supported by a 14Nm blocking brake. It features low inertia because of the choice of materials for its permanent magnets. This motor incorporates a plain output shaft for non-positive shaft-hub connections. The product deploys digital servo feedback. This device encompasses flanged sockets with connectors to connect the feedback and power cables directly.
The motor is meant to be operated between 0°C and 45°C. The unit depicts protection against the penetration of water and dust. Its housing supports both natural convection as well as surface cooling. This product has the same frequency range for its longitudinal axis and lateral axis with sinusoidal oscillations. The device incorporates shock-damped mounting based on the respective construction of the machine. This unit can be mounted either horizontally or vertically as per DIN IEC 34-7 specifications. It is associated with a mounting flange that comprises a standard pilot diameter. The AC servomotor portrays one-year backup support.
This motor encounters a load on the shaft as soon as it is affected by axial and radial forces. The product experiences thermal stress when the shaft encompasses bevel gear pinions. This device needs a reseating action to be done when the storage period exceeds two years. The unit has circular connectors for feedback as well as power connections. It uses a blower to implement surface cooling. This motor has data storage capacities in its feedback. The product has reduced output when the ambient operating conditions are exceeded. This device’s transportation and storage can be done only horizontally. This AC servomotor shipment is done worldwide.