Product Description
The MDD112B-N-040-N2M-130GA2 digital AC servomotor produced by Bosch Rexroth can be mounted upright with the shaft directed either downward or upward. This servomotor has a standard pilot diameter of 130mm. The product renders non-positive and backlash-free torque transmission with its plain shaft. This device has an overall length of 437mm. The unit uses either INS 511 or INS 510-type angular feedback connectors. Its housing supports surface cooling as well as natural convection cooling modes. The motor encounters a position shift when drive pinions with helical teeth are mounted onto the shaft but are not axially fitted to the machine. This product makes use of a blower for surface cooling.
The device operation must be done only as intended to avoid the chances of property damage or personnel injury. The unit features a high surface temperature during as well as soon after its operation. Its blocking brake does not function like a service brake. The motor has an A side as the output direction for its power connection. This product features B side as the default output direction of the feedback cable when an angular connector is utilized. The device permits the use of soldered or crimped power cables if they have metric diameters. This servomotor has backup support valid for one year.
The motor feedback encompasses data storage capacities that can store the motor parameters. This product has a position resolution of 256 x 213 increments per revolution. The device has its parameters set in the related drive controller for the operation of the drive without damage to the motor. This unit achieves its maximum speed based on the DC bus voltage generated by the supply source at its drive. Its type plate contains the required information to procure spare parts during service or when there is a fault. This servomotor is sent in rugged packaging that prevents motor damage during transit.
Wake Industrial Warranty
