Product Description
The MDD112B-N-030-N2M-130PA1 digital AC servomotor offered by Bosch Rexroth can be fitted with either an axial or radial blower for surface cooling. This servomotor is operated in grinding machines. The product has low inertia because of the choice of materials used to design its permanent magnets. This device comes with a 14Nm blocking brake. The unit comprises completely sealed housing. It is associated with high dynamics. This motor comes with a floating bearing on the A-side. The product incorporates protection against contact with live or moving parts with the help of its covers and housing. This device has IP 65 degree of protection for the output shaft with a sealing ring.
The motor depicts a shock-damped mounting solution based on the construction of its machine. This unit uses a mounting flange featuring threads to support Design B14 mounting. It can be installed upright with the shaft facing either upward or downward. The product comprises a standard pilot diameter of 130mm. This device operation must take place only with a digital drive controller. The unit renders digital servo feedback with an integrated multiturn encoder. Its operating curves highlight the torque-limiting data and the speed-limiting data. This motor comprises a breaking point for the maximum torque depending on the DC bus voltage of the drive controller. The MDD112B-N-030-N2M-130PA1 servomotor has backup support for one year.
This product portrays a duty cycle time of up to 15 minutes. The device has Class F insulation. This unit has a mass of 25kg without the blocking brake and blower. It has to be lifted with a crane belt that must not be wound around the shaft. The motor has tapped holes on top of its housing to insert the hooks of a chain tackle. This product is to be free of load on the blower housing or shaft when it is lifted with a crane and belts. This servomotor shipment takes place in custom military-grade packaging.
Wake Industrial Warranty
