MDD112B-N-030-N2L-130GA1

Product Description

Bosch Rexroth is committed to providing excellent customer service by developing superior AC servo motors, frequency converters, inverter modules, brake choppers, control sections, and controllers. These devices are widely used in automated systems across a vast array of industries.

The MDD112B-N-030-N2L-130GA1 model has a plain output shaft with a sealing ring, and it should only be used according to the user manual's recommendations. While revolving at a maximum nominal speed of 3000 revolutions per minute, the motor generates 64.5 Nm of theoretical torque and uses 110.5 A of peak current. The MDD112B AC servo motor has digital servo feedback, 0.25 ohms of winding resistance, and a 90-minute thermal time constant. The 36-kilogram AC servo motor has a winding inductivity of 3.1 mH, a balancing class of N, and natural and surface cooling housing to maintain its internal temperature. This servo motor delivers a constant torque of 17.5 Nm while needing a continuous current of 28 A. It can be employed directly in the machine's workplace, even under unfavorable circumstances thanks to its excellent built quality. The MDD112B AC servo motor is powered via a wire with a minimum diameter of 0.75 mm², and the power connection is located on side A of the motor.

The model MDD112B-N-030-N2L-130GA1 is IP 65 compliant, has an insulation class of F, and has a moment of inertia of 120 x 10^-4 kgm². This motor's windings incorporate a temperature sensor to control temperature and prevent overload damage, and it may be put at a maximum altitude of 1000 meters above sea level. The model's (MDD112B-N-030-N2L-130GA1) holding brake weighs 1.1 kilograms and has clamping and release delays of 30 and 70 milliseconds, respectively.