Product Description
The Bosch MDD112B-N-015-N2M-130GA0 is a digital servo motor. It comes with a built-in multiturn encoder. Multiturn encoders provide feedback within multiple revolutions of the motor shaft. The feedback from the motor is sent via a feedback cable to the drive that controls motor parameters such as torque and speed. The power to the motor is also supplied through a power cable that runs between the motor and the drive. The nominal speed of the MDD112B-N-015-N2M-130GA0 is 1500 RPM. According to the product type code, the frame size of the motor is 112. According to the product type code, the frame length of the motor is B. According to the product type code, the housing design of the MDD112B-N-015-N2M-130GA0 is suited to both surface cooling and natural convection. Performance ratings for the motor vary with the cooling method that is used.
The shaft on the MDD112B-N-015-N2M-130GA0 is a plain shaft with standard B end. The motor does not include a blocking brake. However Bosch does provide blocking brakes for MDD112 motors which can be ordered if required. The power cable from the drive connects to a power connection provided on side A of the housing. The performance specifications for the MDD112B-N-015-N2M-130GA0 are valid for 0 to 45 degrees Celsius and 0 to 1000 meters above mean sea level. If the ambient conditions deviate from these values, the output data will decrease. The derating specifications are provided in the product manual. On average, the output of the MDD112B-N-015-N2M-130GA0 derates by 20% if the temperature rises to 55 degrees Celsius, and by 35% if the altitude increases to 5000 meters above sea level. The approximate mass of the MDD112B-N-015-N2M-130GA0 is 36 kilograms. This product can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
