MDD112B-N-015-N2L-180GA2

Product Description

The Bosch MDD112B-N-015-N2L-180GA2 is a servo motor. It supports digital servo feedback. The motor has a sensor known as an encoder that measures motor speed, torque and position. This information is sent to a drive controller. One of the functions of the drive controller is to ensure that motor parameters comply with values that are set by the operator. The shaft on the MDD112B-N-015-N2L-180GA2 is plain. MDD are also available with keyway. The power connection on the MDD112B-N-015-N2L-180GA2 is located on side A of the housing. The motor includes an integrated blocking brake. The rated holding torque of the blocking brake is 40 Nm. The blocking brake is used to prevent to motor shaft from spinning. The shaft is only released when a 24 Volts DC electrical signal is sent the brake. The blocking brake is intended to sop shaft startup from standstill.

The MDD112B-N-015-N2L-180GA2 motor has 180 millimeters centering diameter. The motor mounts through four holes on the flange. The size of the flange is 193 millimeters and the diameter of each mounting hole is 14 millimeters. The length of the MDD112B-N-015-N2L-180GA2 motor is 387 millimeters. The rated motor speed is 1500 RPM. The motor is designed for natural convection and surface cooling. The motors are packed onto a palette or in cartons at the time of delivery. If a single motor is packed on a palette, then it is secured against sliding and movement by means of squared timbers and tightly lashed into place with taut metal bands. If several motors are simultaneously delivered, then up to three motors will be on one palette. Pieces of styrofoam or cartons are then used to prevent them from damaging each other.