Product Description
The Bosch Rexroth MDD112A-N-020-N2L-130PA0 digital AC servomotor has no blocking brake. This servomotor has a standard housing design that supports both natural convection as well as surface cooling. The product is meant to be kept dry during transport and storage. This device has a fixed bearing on the B side. The unit has to be grounded to the drive amplifier. Its operative curves highlight the intermittent duty torque with S6 operating mode as per DIN 57530 specifications. The motor has a 14.6A continuous current rating with surface cooling in standstill mode. This product features spigot nuts on its power and feedback connectors.
The device supports utilization in grinding machinery. This unit is integrated with a temperature sensor in its windings. Its peak torque can be utilized over a wide speed range. The motor installation can be carried out in any orientation. This product has lesser than standard performance when the installation setup altitude is exceeded. The device does not get damaged by a jet of water sprayed from a nozzle from all directions onto its housing. This unit is connected with a mounting flange featuring throughholes. Its lateral axis can withstand shocks for a maximum duration of 6ms. This servomotor has backup support for one year from Wake Industrial.
The motor needs to be protected against fluid accumulation around the shaft for an extended period with IM V3 or IM V19 vertical installation. This product implements surface cooling with a blower attachment. The device has an overall length of 312mm. This unit has a 10Nm maximum tightening torque for the screws in the threads of the center hole in its shaft. It features balancing with the entire key because of the keyway shaft. The motor has an IP 65 protection category. This product is one of the several MDD series of such motors. This servomotor is delivered to the destination of your preference in any country.
Wake Industrial Warranty
