Product Description
The Bosch MDD112A-N-015-N2M-130PB0 is an industrial servo motor. It includes a built-in multiturn encoder and supports digital servo feedback. The MDD112A-N-015-N2M-130PB0 mounts through screws that pass through the througholes on the motor flange. The flange is designed for mounting as per design B5. MDD112 motors such as the MDD112A-N-015-N2M-130PB0 can also be mounted as per design B14 i.e. mounting with threads. When the MDD112A-N-015-N2M-130PB0 motor is mounted with the shaft pointing upwards, it is important to prevent collection of liquids at the output shaft for an extended period of time. Even if a shaft seal is used, the collection of liquids at the output shaft can lead to liquids entering the motor housing and damaging essential components. The MDD112A-N-015-N2M-130PB0 motor has a shaft with a keyway for form-fitting torque transmission. This type of arrangement is suitable for low motor loads.
The shaft on the MDD112A-N-015-N2M-130PB0 includes a shaft seal. Its function is to prevent liquid penetration motor the motor hosing along the shaft. The protection category of the motor is IP65. The motor cools via natural convection. For extreme loads, a surface-cooling unit can be mounted to the motor. Blower motors that operate at 115 Volts AC or 230 Volts AC are available from Bosch. The blower unit is an independent component that is ordered separately. However when included in the order, the blower unit is delivered mounted to the motor. Axial surface cooling is suited to applications with a slender form. Radial surface cooing is suited to applications that require short construction. Nominal speed of the MDD112A-N-015-N2M-130PB0 motor is 1500 RPM. The motor power connector is located on side B. The motor does not feature a blocking brake.
Wake Industrial Warranty
