Product Description
The Bosch Rexroth MDD112A-N-015-N2M-130GR0 is an industrial AC servo motor. The MDD series supports multiple cooling methods. Surface cooling is supported on motors that operate under extreme loads. The MDD112A-N-015-N2M-130GR0 motor supports both natural convection and surface cooling. MDD motors can be ordered with or without a blocking brake. The MDD112A-N-015-N2M-130GR0 motor does not include a blocking brake. The motor output shaft is available in two designs: as a plain shaft or as a shaft with keyway for form-fitting shaft-hub connection. The shaft on the MDD112A-N-015-N2M-130GR0 motor is of the plain variety. MDD motors are equipped with support for either relative position detection or absolute position detection. The MDD112A-N-015-N2M-130GR0 motor supports digital servo feedback with integrated multiturn absolute encoder. The power and feedback cables are connected to the motor via corresponding sockets.
The power socket on the MDD112A-N-015-N2M-130GR0 motor is on the right side of housing. The motor output data, as specified in the product documentation, are valid for the following ambient conditions: 0 to 45 degrees Celsius temperature and 0 to 100 meters altitude. Operation of the motor is not permitted at temperatures above 55 degrees Celsius or at altitude above 5000 meters. The motor is protected by housing and covers which adhere to construction guidelines as per DIN 40050. The housing provides protection against contact with high-voltage motor parts, solid objects and moisture. The IP65 rated MDD112A-N-015-N2M-130GR0 motor is completely protected against dust penetration. It is also protected against penetration from moisture directed at it from low-power water jets. Rated speed of the MDD112A-N-015-N2M-130GR0 motor is 1500 RPM. The motor centering diameter is 130 millimeters and its shipping weight is approximately 25 kilograms.
Wake Industrial Warranty
