MDD093C-N-060-N2M-110PA0

Product Description

The MDD093C-N-060-N2M-110PA0 is a novel industrial motor design by highly trained engineers of Rexroth Indramat to operate as a rotary main or a servo motor in the industrial servo system. This industrial motor is a brushless device; it operates with increased efficiency and reduced noise. The industrial motor is also an environmentally friendly device as it does not contains a high metal content that can be recycled when the service life of the motor has been exhausted. Integrated into this synchronous motor are special grease-lubricated ball bearings; these bearings help to reduce the frictional heat generated at the motor rotor when the motor is in operation. The centering diameter of this industrial motor is about 110 millimeters, while the total weight of this industrial motor is about 28 kilograms.

The MDD093C-N-060-N2M-110PA0 industrial motor operates with a continuous rated current of about 46.7 amperes; at this current, the motor generates an output torque of about 14.5-newton meters while rotating at a speed of about 6000 revolutions per minute. However, at a maximum input current of about 293.3 amperes, this industrial motor generates an output torque of 60.6-newton meters while rotating at speed as high as 8000 revolutions per minute. At a motor surface temperature of 20 degrees Celsius, this industrial motor operates at a torque constant of about 0.30-newton meters per ampere and winding resistance of about 0.07 ohms.

The MDD093C-N-060-N2M-110PA0 industrial motor combines old motor designs with novel industrial innovation to form a cost-efficient industrial motor that can support the operation of a wide range of industrial machines such as metal forming machines, robotic machines, and lots more.