Product Description
The MDD093C-N-030-N2L-130GB2 digital AC motor provided by Bosch Rexroth is fitted with a plain output shaft. This AC motor should have no fluid collection at the output shaft with the shaft facing upward when mounted vertically. The product housing supports both natural convection as well as surface cooling. This device renders non-positive and backlash-free transmission of torque with its shaft. The unit has an IP 65 protection category for the shaft. Its maximum torque is based on the drive controller used. This motor has a nominal speed of 3000min-1. The product features damage to the bearing on the B side when bevel gear pinions are attached.
This device is operated with tool-changing equipment. The unit operation can be undertaken in poor and adverse environmental conditions. Its installation process is really simple because of the readymade connection cables available for the same. This motor installation altitude must never exceed 5000m above sea level. The product encompasses protection against a water jet sprayed from a nozzle. This device has a maximum 0.3mm excursion amplitude for the related longitudinal axis. The unit permits the use of clamping elements on the shaft. Its housing has resistance to yellowing and weathering. This AC motor comes along with one-year backup support.
This motor reseating action involves opening the line connection of the blocking brake to the drive controller for a brief period. The product depicts a reduced balance class. This device comprises a breaking point for its maximum torque depending on the DC bus voltage as its associated drive. The unit portrays windings inductance of 2.7mH. It is possible to change the output direction for its angle feedback connector by releasing the four fixing screws. This motor features decreased bearings lifespan on exceeding the radial load limit. The product has a C-length code. This AC motor shipping is done through trustworthy logistics agents like DHL and FedEx.
Wake Industrial Warranty
