MDD093C-N-030-N2L-110GB2

Product Description

Whether you talk about the construction detailings or the technical performance, MDD093C-N-030-N2L-110GB2 is the motor that ticks all the boxes. Manufactured by Rexroth Bosch Group with keen detailing, this motor is what every industrialist is looking for empowering their motors.

The blocking brakes present in the motor supercharge the efficiency of the motor as they prevent the movement of a load when the motor is not actively driving it, maintain a specific position of equipment or components, provide an immediate stop function to prevent accidents in case of power loss or system failure, and many more. These holding brakes alone can generate a torque of 22 Nm and need to be connected to a voltage source that can provide a nominal voltage of DC 24 ~ 10% volts. The holding brakes weigh 1.1 kg combined with the motor's mass which is 22 kg to constitute the overall mass which is estimated to be 23.1 kg. In addition to this, when the motor is not functional, it can still function at a steady rate by consuming a continuous current of 32.2(34.3)5) A to produce a continuous torque of 19.5(20.8)5) Nm. To establish the connection of the motor to an electrical source, you can easily find the power connector on side B of the housing.

The shaft is smooth which facilitates installation and the absence of a side B shaft end makes it even easier. It comes with a standard centring diameter which is 110 mm and it takes help from digital servo feedback to send precise details about the position and rotations of the shaft to the control system. If you aim for the extended life of the motor, avoid operating it at temperatures higher than 40 degrees C.