Product Description
The Bosch Rexroth MDD093C-F-060-R2L-110GA0 is a digital AC servo motor. It supports electronic commutation and is made with permanent magnets that enable low motor inertia. The motor does not require maintenance. This is because of the brushless design and use of bearings that are grease-lubricated for entire service life of the servo motor. The sealed housing with IP65 ingress protection rating allows motor use within the working area of the machine even under poor environmental conditions. The MDD093C-F-060-R2L-110GA0 is designed for 0 to 45 degrees Celsius ambient conditions and 0 to 1000 meters site elevation. The nominal speed rating of the motor is 6000 RPM. Features supported by the motor include digital servo feedback, a plain output shaft, 110 millimeters centering diameter, and power connection to side B. MDD motors support optional blocking brakes.
The MDD093C-F-060-R2L-110GA0 does not include an optional blocking brake. An integrated temperature sensor on the motor windings prevents motor overload. Efficient heat conduction from the motor stator to the outside wall enables high overload capabilities. The output torque of the MDD093C-F-060-R2L-110GA0 is usable over a wide speed range. Compact construction of the MDD093C-F-060-R2L-110GA0 allows a high power to weight ratio. High cyclic load capacity enables continuous start-stop operation with a high repetition rate. Sinusoidal application of current with high feedback resolution enables high synchronous operation. The length of the MDD093C-F-060-R2L-110GA0 motor housing is approximately 386 millimeters. Through-holes on the flange allow secure motor mounting. Each of the four holes on the motor flange has a diameter of 11 millimeters. The MDD093C-F-060-R2L-110GA0 motor and associated machinery should be operated by trained personnel. Only accessories approved by Bosch should be used with the servo motor.
Wake Industrial Warranty
