MDD093B-N-040-R2L-110PA1

Product Description

The Bosch Rexroth MDD093B-N-040-R2L-110PA1 AC servomotor tends to get affected on the A-side due to thermal deformations in length. The motor deploys radial surface cooling when it has a short construction. The product uses its blocking brake that helps in the backlash-free holding of the servo axes if the associated machine is turned OFF. The device has an R-style housing design. The unit has a 93 size code. Its power connector is directed towards the A side by default and can be changed if needed. The motor portrays a torque constant of 0.40Nm/A at 20°C. This product encounters a magnetic force on the brake armature disc at zero current.

The blocking brake of this product is activated by the connected drive controller. This helps to maintain the OFF and ON switching sequence in any operating state. The axial forces of the motor are absorbed by the fixed bearing on the B side. The device puts its blocking brake to use to clamp its output shaft in standstill mode. The unit faces a multi-axial stress state at its shaft-hub connection because of bending, torsion as well as axial and radial loads. Its holding brake tends to fail or wear down after about 20,000 revolutions.

The motor might come across shaft breakage or fracture due to ever-increasing deformations. The product supports installation in roller feeds for nibbling, punching and pressing activities. The device and the drive controller work in combination to offer rapid-response as well as cost-effective automatization systems. The unit portrays high power to weight ratio. Its flange can have either throughholes or flange to support B5 or B14 mounting style. The motor installation is a very simple process because of the easily available readymade connection cables. This product is stored and transported between -20°C and 80°C. This MDD093B-N-040-R2L-110PA1 motor with a year’s backup support is dispatched throughout the world to the desired destination.