MDD093B-N-030-N2M-130PB0

Product Description

The MDD093B-N-030-N2M-130PB0 digital AC servomotor delivered by Bosch Rexroth has a permissible axial force that is 0.35 times its permissible radial force. This motor is ideal for deployment in highly dynamic applications. The product is capable of performing electronic commutation. This device uses a mounting flange with a standard pilot diameter of 130 mm. The unit is characterized by low inertia. Its permanent magnets are made of iron oxide or rare earth magnetic materials.This motor has high operational reliability. The product has a temperature sensor in its windings to monitor its temperature and protect against overload. This device features an output shaft with a keyway. The unit supports digital servo feedback. It uses a blower to implement surface cooling. This motor features a maximum operating temperature of 55 degrees C. The product has a protection rating of IP 44 if a blower is attached. This device can be installed vertically or horizontally. The unit is prone to a fracture of its output shaft because of ever-increasing deformations. Its output shaft has a cylindrical shaft end with a DS M3-8 center hole.This motor features a permissible radial force depending on the point the force is applied and the average speed. The product is balanced dynamically according to the balance class mentioned in DIN VDE 0530 specifications. This device supports straight and angle feedback connectors. The unit has a Class F insulation. Its blower has a voltage rating of 1 x 115/230 VAC. This digital AC servomotor must be mounted onto the associated machine by only qualified and trained personnel.