Product Description
The Bosch MDD093A-N-030-N2L-110GA2 is a sophisticated industrial servo motor. It supports several features that make it a great choice for industrial automation solutions. The motor has a sealed housing with sealed connectors that prevent dust and moisture ingress. This gives the IP65 protection rating to the motor. As a result, you can deploy the motor in adverse environmental conditions. The MDD093A-N-030-N2L-110GA2 motor includes an integrated encoder and supports digital servo feedback. The encoder takes accurate measurements of motor parameters including speed, torque and position. The motor sends these measurements – known as feedback – to a connected drive controller. Accurate feedback from the motor allows the controller to adjust its output and bring motor parameters in line with desired values. Prior to system commissioning, an operator programs the desired values for motor parameters.
The rated shaft speed of the motor is 3000 RPM. The shaft is plain and does not include a keyway. You can order MDD motors with shafts that include a keyway. Housing of the MDD093A-N-030-N2L-110GA2 has a standard design. You can operate the motor with two cooling methods: natural convection and surface cooling. Of these two methods, surface cooling enables improved heat dissipation and as a result the motor delivers higher levels of output torque and current. The drive controller provide motor power. The power socket on the MDD093A-N-030-N2L-110GA2 is situated on side B of the housing. The blocking brake on the MDD093A-N-030-N2L-110GA2 is rated for 22 Nm holding torque. Trained professionals should handle and install the motor: this will minimize the possibility of installation errors and ensure reliable motor performance in the long term. Bosch does not permit any modification to motor hardware or software.
Wake Industrial Warranty
