Product Description
The MDD071C-N-040-N2S-095GA0 digital AC servomotor offered by Bosch Rexroth uses an INS 252 connector for its power connection. This servomotor has a 4000min-1 nominal motor speed. The product supports a change in the direction of its angle feedback connector in increments of 90°. This device features a reduced lifetime for its bearings when the radial load exceeds the specified limit. The unit is protected against damage due to overheating by the evaluation of a temperature sensor. This motor connection can be done with power cables that can either be crimped or soldered.
The product-related torque-speed characteristic curves help in identifying the maximum possible usable speed for a specific application with known torque requirements. This device comprises a breaking point for its maximum torque according to the DC bus voltage. The unit should at no time be operated at a temperature higher than 55°C. It incorporates digital servo feedback. This motor encompasses its permanent magnets on a laminated core. The product has no support for a mounting flange featuring a customized pilot diameter. This device operation is possible under adverse environmental conditions. The MDD071C-N-040-N2S-095GA0 AC servomotor has backup support for one year.
The motor is capable of rendering maintenance-free operation. This unit is characterized by a simplified installation process. Its feedback helps in detecting the position of the rotor in the motor. The product housing and covers adhere to DIN 40 050 specifications for their construction and design. This device has a 2Hz to 9Hz frequency range for both its axes with excursion amplitude. The unit deploys a shock mounting solution based on the construction of the machine as well as the results of metrological tests. Its mounting in an upright orientation is possible with the shaft either upward or downward. This AC servomotor transportation is done in durable and rugged packaging to its destination.
Wake Industrial Warranty
