MDD071A-N-040-N2T-095PA1

Product Description

Bosch Rexroth is devoted to delivering superior customer service via the production of high-quality products including alternating current servo motors, linear motors, frequency converters, power supply modules, inverter modules, brake choppers, and drive controllers.

The MDD071A-N-040-N2T-095PA1 model is fitted with a holding brake of 0.3 kilograms with clamping and release periods of 15 and 30 milliseconds, respectively. The holding brake has a holding torque of 3 Nm, a nominal current of 0.6 A, and a nominal voltage of 24 V. The MDD071A AC servo motor develops 6.9 Nm of theoretical torque and consumes 22.6 A of peak current at its highest nominal speed of 4000 revolutions per minute. The internal temperature of this 6.5-kilogram servo motor is regulated by natural and surface cooling, and its winding inductivity is 11.5 mH. The motor receives electricity through a wire with a minimum diameter of 0.75 mm2, and the power connection is positioned on side A of the motor. The motor includes an inbuilt multiturn encoder, a winding resistance of 2.61 ohms, and a thermal time constant of 45 minutes. The most exciting feature of this MDD071A AC servo motor is that it can be used instantly inside the machine's workspace, even under difficult conditions, and it provides a constant torque of 2.2 Nm while requiring a continuous current of 5 A.

The model MDD071A-N-040-N2T-095PA1 contains an output shaft with keyways and a sealing ring, and it should be used according to the directions in the user handbook. This motor's windings are equipped with a temperature sensor to assist regulate temperature and avoid overload damage, and it may be installed at altitudes of up to 1000 meters above sea level. The type is protected to IP65 requirements, has insulation class F, and has a moment of inertia of 4.4 x 10-4 kgm2.