Product Description
The Bosch Rexroth MDD065A-N-060-N2L-095GB0 is a synchronous servo motor. The speed of servo motors is synchronized to the frequency of input current. The motor gets power from a drive controller. The motor sends feedback to the controller: the feedback includes measurements of motor speed and torque. The controller uses motor feedback to adjust its output and control motor speed and torque. The combination of a servo motor and a servo controller forms a servo system. Industrial applications for servo systems comprised of MDD motors and compatible controllers include textiles, robotics and handling equipment. Motors support either resolver feedback or digital servo feedback. The MDD065A-N-060-N2L-095GB0 motor supports digital servo feedback. MDD motors are available with different housing designs. The housing of the MDD065A-N-060-N2L-095GB0 has a standard design that is suited to natural convection and surface cooling.
Rated speed of the MDD065A-N-060-N2L-095GB0 motor is 6000 RPM. The balance class is standard and the side B end of the motor shaft is standard. The main shaft on the MDD065A-N-060-N2L-095GB0 is plain. Operators can also order MDD motors with shafts that include a keyway. The power socket is on side B of the housing. The MDD065A-N-060-N2L-095GB0 does not support an optional blocking brake. Protection class of the motor is IP65. Because of this good protection rating operators can use the motor under adverse operating conditions. The motor output derates if the ambient temperature exceeds 45 degrees Celsius, or falls below 0 degrees Celsius. The motor housing coat is black prime coat (RAL 9005). MDD motors are maintenance-free motors. This is because of a brushless design and use of lifetime lubricated bearings. A temperature sensor on the motor windings prevents overload damage.
Wake Industrial Warranty
