Product Description

The MAF225C-0150-FQ-M2-KQ0-35-N1 Bosch Rexroth asynchronous housing motor is meant to be operated where there is no risk of an explosion hazard. This motor features flange and foot mounting styles. The product is prone to axial and radial loads on its bearings and output shaft. This device is intended to be transported and stored only after removing the coolant so that frost damage is not possible. The unit houses its output shaft on side A. It supports only low axial loads. This motor features an admissible axial load of 100 N.The product is one of the manufacturer's many IndraDyn A series of motors. This device cannot be installed in an upright orientation. The unit must be coordinated with the machine construction so that the specified load limits are not exceeded. It should always be put into operation with a cooling system that is connected externally. This motor must not be used with running water from the public supply network as a coolant.

The product is designed according to DIN EN 60034-1 specifications. This device has two fixed temperature sensors in its windings. The unit comes with protective sleeves that must be removed only just before assembly. Its coolant comes in contact with the screw connections when in use.This motor relies on an encoder for feedback. The product comprises a shaft with a keyway as per DIN 6885-1 specifications. This device is equipped with ball bearings with a low-noise running action and is suitable for high speeds. The unit features grease on its ball bearings that last throughout their lifetime. It has a vibration speed of 1.2 mm/s. This asynchronous housing motor features a temperature range of 10 degrees C to 40 degrees C for its coolant inlet.