Product Description

The MAF225C-0150-FQ-M2-KH0-35-N1 asynchronous housing motor introduced by Bosch Rexroth is one of the many MAF series of motors. This motor works along with the manufacturer's drive controller. The product is meant to be operated only as intended by the manufacturer. This device deploys a liquid cooling action. The unit supports only horizontal mounting. It requires very little maintenance because of its asynchronous profile. This motor cannot be operated in potentially explosive areas.The product tends to portray a hot surface when it is in use. This device must have a proper grounding connection before it is turned on. The unit may show faulty control if it encompasses defective components. It must be installed only in industrial or commercial machinery. This motor should not be jammed or pinched during handling and mounting. The product supports S1 and S6 operating modes. This device supports a maximum unregulated voltage of 540 VDC.

The unit incorporates a maximum coolant supply pressure of 6 bar. It is important to clean up spilled liquids to avoid the risk of falling.This motor can be identified by the nameplate with its type designation, certifications, and key technical details attached to its housing. The product comprises no holding brake. This device has an EnDat 2.1 interface for its encoder. This device is associated with a fixed position of the encoder connection. The unit has an IP 65 degree position that allows it to be used even under adverse conditions. It does not have any shaft seal. This asynchronous housing motor comprises deep-groove ball bearings.