Product Description
This servo motor MAF225C-0150-FQ-M2-GF0-35-N1 of Indramat is a proficient motor used mainly for applications that contain high torque and motion control requirements. Indramat is a large electrical and mechanical equipment supplier and designer company and it has gained much reputation in various industrial sectors.
This servo motor MAF225C-0150-FQ-M2-GF0-35-N1 is a high torque consisting with 764 Nm and due to high torque its power is also at a high rated level of 120 kW. It can work only with a current limitation of 215 A and has a working speed of about 1500 revolutions per minute. This MAF225C series servo motor needs a discharging capacity of 44 nF as it can constantly give a thermal time management of 35 mins. This feature makes the motor highly demanding in several domains where power and work efficiency are major requirements. The motor holds a constant torque at 20 degrees C which is rated at 3.68 Nm/A to properly maintain its motion and functionality. Another remarkable specification of this motor is its continuous working torque at standstill conditions. This standstill torque has an 825 Nm value highlighting the use of motor in different industries.
This servo motor MAF225C-0150-FQ-M2-GF0-35-N1 has a very heavy weight of 587 Kg that needs special and careful maintenance along with a large area to keep it protected against dust and water dangers. It features an insulation protection of the IP65 category that helps to keep the motor safe from high voltage and burning issues. The motor has a liquid cooling thread with a multi turn absolute encoder working with 2048 incremental steps and power connection at side G. Also, it has a labyrinth sealing ring shaft without any holding brake. Both flange and foot mounting types are supported by this motor and it can work from temperature 0 to 40 degrees centigrade.