Wake Industrial LLC is not an authorized distributor of this product.

MAF180D-0200-FQ-S2-DH0-35-N1

  • Rated 4.5 (30 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911337720

Current response time:

3 Minutes 53 Seconds

MAF180D-0200-FQ-S2-DH0-35-N1 Induction Motor is manufactured by Bosch Rexroth Indramat. This motor has a Singleturn absolute encoder , EnDat2.1, with 2048 encoder and a Standard bearing. It also has a Plain, without Sealing Ring shaft and is not equipped with a holding brake.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

MAF180D-0200-FQ-S2-DH0-35-N1 is a Bosch Rexroth MAF series motor. MAF motors are liquid cooled and use a circulating coolant for heat dissipation. Liquid cooling enables higher output torque and makes MAF motors suitable for high-load applications. Rated torque output of the servo motor is 400 Nm. The highest torque the motor can deliver is 1008 Nm. Output current rating of the servo motor is 168.5 Amps. The highest current the motor can deliver is 377 Amps. Power output rating of the motor is 83.8 kilowatts. The higher power output the servo motor can deliver is 171.79 kilowatts. The optimal ambient temperature for MAF motors is 0 to 40 degrees Celsius. Recommended temperature range for the coolant supply is 10 to 40 degrees Celsius. During operation, the coolant dissipates 5.4 kilowatts as heat.

Optimal cooling requires 7.7 liters/minute coolant flow rate. The volume of the duct for the coolant on the MAF180D-0200-FQ-S2-DH0-35-N1 motor is 1.45 liters. As a servo motor, the MAF180D-0200-FQ-S2-DH0-35-N1 comes with a factory-installed single turn encoder. This is a sensor that measure motor speed and torque, and transmits measurements via a feedback cable to the motor controller. Direct connection of MAF motors to AC mains is not permitted. Only compatible controllers from Bosch should be used for MAF motor operation. Standard bearings are installed on the motor. Depending on requirements, operators can order other types of available bearings for MAF motors. The motor provides two mounting options: flange mounting and foot mounting. The motor is tested before delivery. Therefore customers don't need to perform high-voltage tests on the motor. A name plate on the motor provides type code and other relevant information to aid motor identification.

  • MAF180D0200FQS2DH035N1
  • MAF180D 0200 FQ S2 DH0 35 N1
  • maf180d-0200-fq-s2-dh0-35-n1

MAF180D-0200-FQ-S2-DH0-35-N1 Technical Specifications

Cooling: Liquid
Protection rating: IP65
Encoder: Single turn
Electrical connection: Terminal box
Shaft: Plain
Seal: No
Holding brake: No
Mounting: Foot/flange
Bearings: Standard
Speed rating: 2000 RPM
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo