Product Description

MAF180D-0200-FQ-S0-KQ0-35-N1 is an advanced industrial servo motor. It is made by Bosch Rexroth. The motor is part of the MAF series of liquid cooled motors. Liquid cooling provides that highest rate of heat dissipation. Liquid-cooled motors can deliver the highest levels of output torque and current. This makes these motors suitable for applications with the highest load requirements. MAF motors have IP65 rated housings. This type of housing is completely impervious to dust ingress. In addition, these housings provide robust water ingress protection. This excellent level of protection makes IP65 rated motors highly suitable for a wide range of demanding industrial applications. The MAF180D-0200-FQ-S0-KQ0-35-N1 is a MAF motor with 2000 RPM speed rating. The peak speed rating is 6000 RPM. MAF motors can be ordered with different types of bearings.

The bearings on the MAF180D-0200-FQ-S0-KQ0-35-N1 motor belong to the standard category. At standstill, the motor can deliver 460 Nm continuous torque and 187.3 Amps continuous current. Torque constant of the motor is 2.75 Nm/A at 20 degrees Celsius. A singleturn encoder is installed on the motor. This provides feedback inside one revolution of the motor shaft. The motor can be either foot-mounted or flange-mounted. A flange is a flat plate attached to the motor with holes of mounting screws. These mounting options give operators flexibility in motor mounting. MAF motors support optional holding brakes. However, a brake is not installed on this motor. MAF motor can suffer from irreparable damage if they are connected to AC mains at 50/60 Hertz. These motors must be used with compatible Bosch motor controllers. In addition to providing motor power, the controllers make sure the difference between desired and actual motor parameter values is minimized.