Product Description

The MAF180D-0150-FQ-S2-FG0-35-N1 is a liquid cool Asynchronous AC servo motor designed for heavy duty applications that may result in high power dissipation leading to high temperatures. This is where the liquid cooling helps this motor cool down quickly. With the help of water cooling, this motor can help dissipate 3.0 kW of heat with a flow rate of 5.1 liters per minute, allowing the motor to cool down rapidly.

This motor has a base speed rating of 1500 rotations per minute and can provide a continuous rotational torque of up to 435 Nm, which can further increase to 1013 Nm when the motor is at a maximum speed of 6000 rotations per minute, but only for 6 minutes maximum. This motor has a power rating of 68.3 kW and draws a current of 135.5 Amperes, hence it would require a high power and efficient power supply unit to operate the servo motor at its recommended rating conditions. Whenever the motor is operated at non-rated conditions, its speed is around 1000 rotations per minute.

For accurate movement, the MAF180D-0150-FQ-S2-FG0-35-N1 comes with a 2048 step resolution single turn encoder that is designed to count the number of steps with the help of the rising edge of a 5 volts square wave pulse. This encoder requires 30 mA of current to operate and can also help differentiate between the direction of the rotation of the motor shaft thanks to the inverted square wave generation by the encoder, which is then sent to the motor controller module. The encoder relies on the EnDat 2.1 digital encoder protocol for communication.