Product Description
The MAF180C-0200-FQ-S2-EH0-35-N1 asynchronous housing motor provided by Bosch Rexroth can be used under unfavorable conditions. This motor offers a drive solution with high performance when it is used with the manufacturer's IndraDrive drive controller. The product can be installed only in horizontal orientation. This device is meant to be used only as intended by the manufacturer. The unit should be handled by skilled and trained personnel. It is not meant to be operated for residential applications. This motor can be used only for applications specifically approved by the manufacturer.The product has a surface temperature of over 60 degrees C when it is in use. This device portrays faulty control because of operator errors. The unit has a cooling time of approximately five times its thermal time constant. It poses a risk of injury because of improper handling. This motor portrays S1 continuous operation mode and S6 periodic operation mode.
The product has a plain output shaft. This device depends on an absolute encoder for feedback. The unit supports an unregulated DC bus voltage of 540 VDC. It is important to immediately clean up any liquids that have spilled on the floor to avoid the risk of falling.This motor may cause unfavorable consequences if the safety instructions are not complied with. The product has a reduced torque when the key speed is reached if its derating takes place. This unit must undergo a compatibility test for its housing when new materials such as cleaning agents and lubricants are used. It has an IP 65 protection class according to IEC 60529 specifications. This asynchronous housing motor can be used only with gears that have a closed lubrication system.