Product Description

The MAF160C-0200-FQ-M2-DG0-05-N1 motor is one of the products from the MAF series produced by Rexroth Indramat. This motor is built with the industrial use in mind to cope with the high-stress environment. This motor is characterized by such features as liquid cooling, high torque, high precision and high reliability.

From the part number, the motor is a standard size 160 and its length is classified as type C. The winding code of 200 means that this is a three phase AC servo motor, which is a high performance and efficient motor. One major characteristic of this motor is the forced cooling system FQ. To cool down the heat produced during operation this system employs an external liquid coolant. The liquid cooling system not only increases the efficiency of the motor but also minimizes the mechanical stress which is common with other cooling methods thus reducing the frequency of maintenance. The M2 in the part number of the product indicates the presence of an encoder which is quite helpful in giving the speed and position information to the users. This encoder has a total of 2048 increments per rotation which makes it possible to have a good and accurate control of the motor. It is a Multi-turn absolute value encoder, this means that the motor position is well monitored and the system can perform well in any application.

The power terminal box is present at the right side of the motor as per the label on the part number as 'D'. This design is quite helpful in that it can be easily incorporated into other systems in use. The letter G denotes that the motor has a plain shaft with a sealing ring in it. However, this motor does not have a holding brake and this implies that it cannot come to a standstill as soon as power is switched off. It is rather easy to install the motor as it has a size 05 flange which is used to mount the motor. The motor contains standard bearings that are denoted by the letter N and these enhance the motor's reliability and its service life. Also, the motor has been developed to work in the vibration environment with the severity level of R, so it will perform suitably even in conditions with strong mechanical stress.