Product Description

The MAF160C-0150-FQ-S2-EQ0-35-N1 asynchronous housing motor supplied by Bosch Rexroth supports flange and foot mounting styles. This motor features a keyway shaft that is balanced with an entire key. The product portrays a maximum operating temperature of 55 degrees C. This device uses a liquid as its coolant. The unit can be fitted with the coolant hose by taking off the protective caps on the coolant port threads present on the motor and fastening the pre-assembled quick coupling. Its connection threads are equipped with protective plugs that must be removed only before the coolant ducts are screwed in.This motor has a couple of PTC temperature sensors installed in its windings. The product uses a RGS1003 connector socket for the encoder connection.

This device needs two power cables for its connection if the bending radius is large. The unit has a maximum current carrying capacity of 100 A. Its connector socket and cable-sided coupling must be manually fitted onto and screwed to each other. This motor is connected to power on its upper side using a terminal box or a device connector.The product associated power connectors and cables must be bought as separate subitems. This device supports only low axial shaft loads. The unit may need a higher level of protection than offered by the radial shaft sealing ring when it is used under unfavorable conditions. It can function as a main servo drive for all rotary drive tasks. This motor along with the drive controller delivers drive solutions with open functionality and high performance.