Product Description
The Rexroth MAF160B-0200-FQ-M2-GK0-05-A1 AC Servo Motor is suitable accordingly for extreme fields of application in harsh industrial environments. This is also good for tough application requiring power and accurate functioning as it is able to deliver a whopping 50.3kW of power, and rated torque of 240Nm at a speed rated at 2000 revolutions per minute. The pump motor provides a reliable performance even when loaded working at a de-rating speed of 1500 and a peak rated torque of 550 Nm. It also pours out dynamic torque of continuous 250 Nm at the stop. The rated current is 108.5 A while a continuous amount of 112.3 A current can be maintained at standstill state.
The torque constant of the motor is 2.4 Nm/A at 201/4C, which enables high dynamic performance and high control performance. The minimum cross section area of power cable which is required to ensure safe and efficient energy transfer is 35mm2. Ensure that the mains supply connection of the motor is completely disconnected and that the disconnection is not reconnected accidentally before undertaking work on electrical parts carrying voltage above 50 V. If the powered button is pressed, wait for at least 30 minutes for all the internal capacitors to discharge before starting any activity. It is also common to check first what the voltage rating is of any part to be touched.
All active connection terminals or similar contact areas should be covered during operation to prevent risk of accidental touching of such active contact points. Also, RCDs shouldnt be applied here rather overcurrent protective devices should be employed instead for indirect contact protection on electric drives. To avoid accidental machine action, measures to your safety should be taken, such as using higher level limitations and other monitoring tools.
Wake Industrial Warranty
