Product Description

Wake Industrials, being the recognized distributor of Rexroth Bosch Group promises to deliver top-notch quality motors with a 1-year warranty all across the globe. MAF130D-0200-FQ-S2-AG0-35-V1 is one of the asynchronous motors that belongs to the IP 65 motor protection class and its insulations belong to the F class according to DIN EN 60034- 1.

Collectively, these two ensure that the motor can bear the low-pressure water jet sprays and minute dust particles and that the insulations can withstand 155 degrees C of temperature. Additionally, the discharge capacity of the motor is 25.1 nF and the duty cycle time of this motor is 10 minutes. Furthermore, the motor has a thermal time constant of 15 minutes and the torque constant value is 2.51 Nm/A. As the cross-section of the power wire is adequate i.e. 25 mm2, they offer flexibility while helping in maintaining voltage levels over long distance side by side. As the motor has reinforced bearings, the rotor can rotate at up to 7500 rpm. However, it is not recommended to operate the motor at maximum speed for a longer duration as it can affect the durability of the motor. So, operate it at its rated or key speed i.e. 2000 rpm and 1500 rpm respectively.

There are 3 pole pairs and the moment of inertia of the rotor is 0.151 kgm2. As the holding brakes are absent, the motor weighs 147 kg and produces a sound pressure level of 70 (+3) dB (A). liquid cooling mechanism with a 1/4" connection thread is used in which water is used as a coolant that helps keep the components of the motor cool as they heat up by continuous operation. In addition to that, MAF130D-0200-FQ-S2-AG0-35-V1 has an absolute encoder with 2048 increments and a connector is present on the A side of the motor housing. As it has a plain shaft, flanges, and feet as well, it can be easily attached to any surface with the help of screws and bolts.