Product Description

Whether it's packaging and food processing machines or metal processing machines, MAF130D-0100-FQ-M2-EH0-35-N3 is an asynchronous motor by Rexroth Bosch Group is designed to deliver high performance.

This motor has a total mass of 147 kg, and the number of pole pairs is three, which influences its speed and torque. It has a component discharge capacity of 26.7 nF, and the power wire cross-section value is 10 mm2. The thermal time constant is 3.5 minutes, and the cycle duration is 5 minutes. The torque value that this motor can produce without overheating is 220 Nm, and the highest torque that this motor can produce under specific conditions is 500 Nm. The key speed of MAF130D is 500 min-1, and the rated speed at which the motor rotates under optimal conditions is 1000 min-1. However, the motor can rotate at the maximum speed of 6,000 min-1 along the bearings. The maximum power output this motor can deliver under specified optimal conditions without any damage is 23.04 kW, but it can exceed 47.23 kW. 50.7 A is the amount of electric current that this motor can safely and continuously conduct without damage or overheating, but it can also exceed 109.1 A under specific operating conditions.

The motor is identified by a size of 130 and a length labeled D, with the windings classified as 100. The components of the motor are cooled down by the liquid cooling system and it has a multi-turn absolute encoder that produces 2048 increments. This motor features a plain shaft but does not include a shaft sealing ring and the holding brakes. It supports both flange and foot mounting and comes with standard bearings.