Product Description

One of Rexroth Indramat's high-end motors is the MAF130C-0200-FQ-M2-AH0-05-A1. This motor, which is part of the MAF series, is well-known for its outstanding performance and liquid-cooled construction. To guarantee safety and efficiency, the motor runs on precautionary extra-low voltage PELV systems. Conforming to ?PELV? standards are all terminals and connectors with voltages ranging from 5 to 50 volts.

Both continuous (S1) and periodic (S6) operations are covered by the documentation of Rexroth MAF motors according to EN 60034-1. The motor duty cycle is a component of operation mode S6 which is determined as the proportion of operating time with a constant load to the overall cycle time. The motor's ability to handle demanding applications is shown by these parameters. There are built-in monitoring mechanisms that assist avoid harmful motions caused by malfunctioning controls.

Here is a simple explanation of a type code MAF130C-0200-FQ-M2-AH0-05-A1. 130C notifies a motor frame size and length. MAF is indicated by the acronym which stands for a series of liquid-cooled motors. Alongside A side, you will find the electrical hookup. A simple shaft devoid of a sealing ring is the H shaft with 0 as no holding brake. A fixed bearing on side A is indicated by the letter A and 05 implies flange mounting. Finally, the value 1 represents vibration severity A. This MAF130C variant is backed by a 1-Year warranty and complete product documentation and is available worldwide from Wake Industrial.