Product Description

The MAF130B-0250-FR-S2-HH0-05-N1 is a 2500 rpm Asynchronous AC servo motor that requires 480 to 575 volts AC to operate. This AC servo motor has a 3-pole design which allows it to excite the rotor with varying frequencies that allow the user and the motor controller to control and regulate the speed of the servo. This motor has a winding code of 0250 and has a frame size of 130 mm with a length B.

The MAF130B-0250-FR-S2-HH0-05-N1 has a derating speed of 2000 rotations per minute which is the reduced capacity speed of the motor when not working under complete operating conditions. This motor can achieve a maximum torque of 221 Nm at a maximum speed of 5000 rpm with a torque of 1.83 Nm per ampere of current. Since this motor requires approximately 55 to 56 Amperes of current to operate, its power cable's cross sectional area is around 16 mm^2 which helps with the transmission of the high amount of current without overheating.

Speaking of overheating, this motor features a liquid cooling design that helps it cool down the internals of the motor when operating under heavy load. The required flow rate of the coolant is approximately 3.2 liters per minute which helps the motor cool down much faster. Using different kinds of coolants may require you to change the coolant parameters and the motor temperature might react accordingly. This motor takes approximately 15 minutes to change its temperature from high to low or vice versa. The thermal time constant may vary when using different types of coolants. The coolant helps dissipate around 2.2 kW of power as heat keeping the motor cool and efficient.