Product Description

Since the output of motors strongly depends on the type of winding present, most large and heavy motors are consequently fit for meeting high demands. The MAF130B-0100-FQ-C0-AH0-05-N1 is a large MAF motor by Rexroth with a reported mass and length of 82 kilograms and 413 millimeters, respectively. Most motors of this size excel in applications requiring heavy loads in industrial or commercial settings. Since this motor is a lot heavier than marketed motors on the market, Rexroth recommends using proper lifting equipment to hoist or install this motor model. Improper handling and mounting of heavy motors may lead to injuries or, worse, loss of life.

When operated at its base speed, the motor transmits a shaft torque of 112 Nm. When allowed to operate at sub-rated speed, the motor shaft may deliver higher torque values, approaching its maximum torque rating of 254.7 Nm. During the stall or standstill condition, the MAF130B-0100-FQ-C0-AH0-05-N1 achieves a slightly higher torque value of 115.8 Nm. Focusing on its current characteristics, this motor model exhibits a trend similar to that of its torque. During rated operation, the base current is 28.4 A. Meanwhile, the stall current is 29.3 A, which is also slightly higher than the base current. Finally, the maximum current of the MAF130B-0100-FQ-C0-AH0-05-N1 is 61 A, which is way higher than its base current.

The nameplate power of the MAF130B-0100-FQ-C0-AH0-05-N1 is 6100 watts, achievable when the rotor shaft moves at a speed of 1000 rpm. By changing the drive supply, the speed of this motor model may be changed up to a maximum value of 6000 rpm. For motors, the maximum speed value is dependent on the type of bearing employed.