Product Description

Bosch Rexroth manufactures the MAF100D-0250-FQ-S2-AL0-35-N3 AC servo motor. A liquid-cooled servo motor with a rated speed of 2500 rpm, the MAF100D-0250 is designed to run continuously. In these circumstances, it draws 45.8 A of current while producing a rated torque of 75.0 Nm and a rated power of 19.63 kW. The motor has a maximum torque of 177.5 Nm and a maximum power of 40.24 kW, which allows it to operate at greater speeds. It's crucial to remember that the torque starts to drop after the crucial 2000 rpm speed. The kind of bearing that is utilized determines the motor's maximum speed. The maximum speed with a standard bearing (N) is 9000 rpm.

The maximum speed rises to 6000 rpm when a high-speed bearing (H) is used. However, the maximum speed is restricted to 3000 rpm if an A-side fixed bearing (A) is used. To guarantee the motor runs securely and dependably, the maximum current of 100.4 A is an essential criterion for choosing the right drive electronics and protective devices. With a continuous torque at a standstill of 80.0 Nm, the MAF100D-0250 servo motor can produce this torque constantly even when it is not spinning. It uses 56.1 A of current to do this.

The torque generated by the motor per ampere of current is shown by its torque constant, which is 1.55 Nm/A. At 3.5 minutes for the thermal time constant, it warms up rather rapidly. It has a 5-minute cycle time with a 44% duty cycle and is intended for sporadic duty cycles. The capacitance between the motor terminals and housing is represented by the discharge capacity of 9.2 nF. Its three pole pairs affect how quickly it synchronizes. The motor weighs 64.0 kg, has a rotor inertia of 0.0320 kgm^2, and can produce sound pressure up to 70 dB(A) with a potential increase of 3 dB(A). We are providing a one-year warranty on this motor.